I am feeling very creative but only in one direction currently. Which does make it very interesting for anyone reading a blog! I still eat very well, bread is being baked, mending is being done (which I will take some pictures of soon), sewing is being done, my shop is being stocked over at Etsy, but I just want to work with plants! I laugh at myself. When I realized how easy it is to wrap plants in fabric with a little bit of moisture and see what happens, that is all of what I wish to do! But it is pretty boring to anyone else unless you are interested in it as well.
There will be more around here then most people will want.
But I said I would write down the process so here it is.
The first thing you need to do is go collect plants. Any plants. Fall leaves give very nice prints. I read where flowers do not print as well as you might expect. Give it a try.
Lay those plants on top of a piece of fabric that has been dampened with mordant. In this case, I used a 50% solution of white vinegar (50 percent vinegar, 50 percent water) in a spray bottle. The flatter the plants are, the better they will print.
I do not use cling wrap underneath the silk. Using cling wrap limits how far the colors bleed through the layers. It becomes more modern art doing it this way. However, I have prints of leaves and acorns with out the cling wrap that are very clear. In my class, many people used the cling wrap and there were a lot of leaves. The little red maple leaves are especially clear.
If you wish to, you can add another layer. I make big bundles. This is a cotton sheet that has been ripped into lengths. It was put into an iron solution where 1/2 teaspoon of iron sulfate was dissolved in 1 liter of water. Again, this is a mordant. The goal is to pull the color from the plants into the plant fiber. On a protein fiber, a mordant can make a color more vibrant or deeper.
I make sure every layer is damp, whether it is vinegar, tea, iron, whey, or soy milk. Something. Even plain water will act as a mordant because tap water has other chemicals and minerals in it. You can even add some dye to your mordants to see what happens.
When your blundle is as big as you want it, tie it all up. It needs to be rolled tight so if you think you will not roll it tight enough without help, roll it around a stick. You can also put a weight on the end of the fabric so you have some resistance to pull against when you are rolling.
One of the tricks I learned at my class, was using a turkey roaster for steam. My parents had one they did not use so I brought it home. Put water in it, bring up to a boil, place your bundles in it and leave for 90 minutes. If you do not wish the water to color the bundles in any way, left out of the water. You can add dye to that water and over dye them as you are printing.
After 90 minutes, you can turn off the turkey roaster and wait for them to cool so you do not burn yourself. That is my suggestion. But if you cannot wait, you can open them right away to see what you will get.
Usually the unexpected.
I have been doing some reading and you can print by just making bundles. Dampen the cloth or plants, or both. Lay the bundle out the same and roll it up. Just let it sit for awhile. Open it like a surprise!
I wish to play more with this technique. The skirt I made recently, that I adore, I look at it and think, "I can mend it this way, print it that way, and dye like that" when it eventually starts to show wear. Making witchy clothes.
I just do not feel like I have enough time to be creative!
Oh well. More walks. More plants. More bundles. I can just be told I am going a bit crazy.
Thursday, August 22, 2019 at 3:09PM 
